Loading ...
Loading ...
Loading ...
Using the Electronic Image Stabilizer (EIS)
When you use zoom to record a magnified subject iu_ge it will correct fuzziness m the recorded image.
1 Press the MENU button,
choose "EIS" on the
"Camera Fmactions Setup"
menu screen, and then press
the I,_/11 button.
2 Choose "On" or "Off'. and
then press the 1_/11 button.
3 Press the MENU button to end setting.
OChecking whether EIS is On or Off
You can check whether EIS is On or Off by the on-screen
information display.
EIS
nee z_ _,Ja_
Alter recording with EIS set to "Oft". it is reconmaended
that you retttrn the setting to"On" and then turn the DVD
Video Camera off. unless you normally record with EIS
"Off' setting.
Note:
• The EIS setting will be stored in memory even when the
DVD Video Camera is turned off,
• It is recommended that you specify"EIS: Off'when using
the DVD Video Camera on a, desk or tripod.
• When EIS: On" is specified, there will be a slight
difference between the actual movement and the
movement on screen.
• Gross camera shake may not be ent{re_y corrected even
if "EIS: On" is specified. Firmly hold the DVD Video
Camera with both hands.
• EIS may not operate correctly when the tele or wide-
conversion lens (optional-user provided) is used.
• When you record pictures with setting 10x or more of
magnification and turning the EIS to "ON" in dim places,
after-images may stand out. In this case, we recommend
using a tripod with tu rning the E/S to"OFF" (oniy for VDR-
M5OPP).
• The EIS function cannot be used when still images are
recorded on the card (only for VDR-M70PP).
Reducing Wind Noise during Recording (Wind Cut)
When recording sound from the microphone built into this DVD Video Camera you can reduce wind noise in
recording.
If "\Vind_Cut: ON" is specified, the low-frequency components in the sound picked up by microphone will be cut off
during recording: This makes it easier to hear the target voice or sound during playback.
1Press the MENU button,
choose "Wind Cut" on the
"Camera Ftmctions Setup"
menu screen, and then press
the I,_/11button.
2 Choose the desired option,
and then press the 1,_/11button.
3 Press the MENU button to
end setting.
rT:,
FINE EP 3O _004
Wind cut icon
Note:
• You can also use the on-screen display to confirm that
Wind Cut has been set.
• The Wind Cut setting will be stored in memory even when
the DVD Video Camera is turned off.
• The Wind Cut function will work only during movie
recording.
• The Wind Cut function works only with the built-in
microphone: It will not function when using an external
microphone (R 68).
83
Loading ...
Loading ...
Loading ...