Loading ...
Loading ...
Loading ...
Recording Movie
Before You Begin ] • Insert a recordable DVD-RAM or DVD-R disc intothis DVD Video Camera.
ACCESS/PC indicator
Pressing REC once will Power switch
start recording;
pressing it once again
will temporarily stop
recording.
1Tun1 the DVD Video Camera on.
Set the pox_er switch to" b_ "to turn the DVD Video
Camera on.
After the ACCESS/PC indicator goes out, peribrm
the subsequent operations:
2 Check the sut!iect on the screen (x iewfinder or LCD).
If using the viewfinder, pull it out.
3 Press the RE(: button.
further recording can be made while "DISC ACCESS" is
being displayed.
Recording will restart after the message disappears.
• DO not turn power off while message "DISC ACCESS" is
being displayed.
• Take care that power is not interrupted while the
ACCESS/PC indicator is blinking.
• The minimum recordable time of movie is approximately
3 seconds.
• See page 93 for setting of Record LED (recording
indicator) On/Off.
• For various functions available during recording, see
"Setting Up Camera Functions" on page 80.
• Panasonic cannot be responsible for video and audio that
cannot be recorded or edited because of any defect.
• The power switch can be changed even during recording,
but the operation will not be changed.
• Each time the DVD Video Camera enters the recording
pause mode, the counter display wilI be reset to
"0:00:00".
• When using DVD-R disc, do not perform the following, or
data on the disc may not be read:
- Using another device, doing additional recording on
DVD-R disc first recorded on this DVD Video Camera
- Using this DVD Video Camera, doing additional
recording on DVD-R disc recorded on another device
• It is recom mended that you set the LOCK switch to _ (to
the left) to prevent the power switch in the" _U "position
from accidentally moving to " _ ".
The "0 I1"mark in the viewfinder or on the LCD
screen will change to the '0 REC" mark, and
recording will start.
During recording, the recording indicator on the front
of the DVD Video Camera will light.
Pressing REC again dnring recording will set the
DVD Video Camera to recording pause mode.
4 _\Nen recording is finished, turn the DVD Video
Camera off.
Note:
• See "Check 1" on page 150 when recording movie is not
possible.
• See "Check 4" on page 150 if it takes some time before
recording is possible.
• See "Check 5" on page 151 if the DVD Video Camera
does not operate.
• See page 54 for on-screen information display.
• It is recommended that you use DVD-RAM disc from
which recorded contents can be deleted.
• Sound is recorded from the internal stereo microphone
on the front of DVD Video Camera: Take care that this
microphone is not blocked.
• You can press the REC button immediately after the DVD
Video Camera enters recording pause mode, but no
51
Loading ...
Loading ...
Loading ...