Loading ...
Loading ...
Loading ...
This section explains preparations for recording -setting up the DVD Video Camera and battery pack.
Setting Up the DVD Video Camera
Holding DVD Video Camera
Using Grip Belt
Insert yottr right hand from the bottom of DVD Video
Camera up to the base ofyottr thmnb.
Put yottr hand in a position where you can easily operate
the REC button and the Zoom lever.
Acliust the length of grip belt so that the DVD Video
Camera is stable when you press the REC button with
your thumb.
1) Detach the belt. @ @
2) Ajust the length of_ip belt.
3) Attach the belt.
Note:
DOnot adjust the grip belt while holding the DVD Video Camera: Doing this could cause the DVD Video Camera to fall
and be damaged.
To use as a Hand Strap
Using the Grip Belt as a hand strap makes it easier to carry the DVD Video Camera.
1 Detach the Grip Belt from the Video Camera. 2) Push the Lock button and pull the grip belt from
1) Open the Lock cover, the DVD Video Camera.
Support the DVD Video Camera securely by the
hand to avoid l'alling.
Lock cover
Open the lock cover while pinching the protection
portion of both ends
2 Make it a hand strap.
1) Turn over the belt.
2) Pull the tip in the derection of the
arrow.
3) Attach the belt.
L°ckbutt°n/// t'' 1'>
Lockcover <
Return the lock cover to the closed position
after pulling out the grip belt.
34
Loading ...
Loading ...
Loading ...