Loading ...
Loading ...
Loading ...
Recording Stills
Note: 2
Recording of stitl images is possible on DVD- RAM disc and
card. 3
ACCESS/PC CARD
indicator ACCESS
/ indicator
Check the snbject on the screen (viewfinder or LCD).
Press the RE(; button.
The DVD Video Can:era automatically l\_cuses on
the subject at the center of screen (when anto focus is
selected).
REC button
Power switch
1Turn the DVD Video ( an:era on.
When using DVD-RAM disc:
Set the power switch to" I'_ ".
When using card:
Set the power switch to "_1 ".
After the AC(ESS indicator goes out, pert\ran the
subsequent operations:
4
The screen will be black, and then the recorded still
will be displayed. \_l:en the "0 I1" mark appears, you
can proceed with the next recording; while "DISC
ACCESS" or "CARD ACCESS" is being displayed,
you cannot proceed with the next recording.
Setthepowerswitchto"OFF"toturntheDVDVideo
Camera off.
T:trnpoweroffonlyaftermessage "DISCACCESS"
disappears.
Note:
• See "Size and Quality of Photos" on page 33 for details
about photos on card.
• See "Check 2" on page 150 if recording photos is not
possible.
• Do not operate the power switch or remove the card while
the ACCESS/PC or CARD ACCESS indicator is [it or
blinking: Doing so may damage the card or the data on
card.
• With VDR-M70PP, the range of screen in which
recording is possible will be different for movie and still.
• The DVD Video Camera automatically sets the shutter
speed between 1/800 and 1/30 second (between 1/800
and 1/t0 second if Program AE has been set to Low
Light) depending on subject brightness.
52
Loading ...
Loading ...
Loading ...