Loading ...
Loading ...
Loading ...
UNFORMAT DISC
125
Use AC adapter/
charger. 45, 127
Use AC adapter/
charger.
Turn off power. 45
108
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
Video Camera before using it.
Reinitializing even a disc used on this DVD Video Camera may be
necessary (initializing wilI erase all recorded contents on disc). If
this message appears, try to initialize the disc. If the same message
still appears, the disc may be damaged: Use another disc.
See *2 on page 157.
Finalization is not possible when the DVD Video Camera is powered
by a battery pack: Use the AC adaptor for finalization.
Scene cannot be repaired when the DVD Video Camera is powered
by a battery pack.
Ifthe AC adaptor is unavailable in handy place, remove the disc, use
the opposite side, or use another disc. To repair the removed disc,
insert the disc into the DVD Video Camera afterwards, and connect
the AC adaptor.
No movie can be copied to card.
Select stills and copy them to card.
• A locked card or write-protected disc is inserted.
• Release the lock or write-protect using the Card or Disc
Navigation menu.
VIDEO scene cannot be
copied to card.
Write protected.
Check card.
Write protected.
Check disk.
31,124
*l
• This messagemay also appearwhen dirt adheresto disc. I fthis messageappearswhen arecorded disc is recognized
inmlediately after it is inserted, do not repair the disc: remove it and then use a soft, dry cloth to clean off the dirt
bel\_re using it.
• This message may also appear when condensation occurs. In this case, do not repair the disc: tnnl the DVD Video
Camera off. wait until it dries out. and then tnm it on again.
• Ifthe repair message appears when you turn the DVD Video Camera on from offwith a disc loaded after recording
on it. choose repair.
• If the repair message appears when recording and playback are normally possible with another disc - and no
condensation has occurred and the disc is not dirty - choose repair.
*2
• This message may also appear when dirt adheres to disc. In this case. do not initialize the disc: remove it and then
use a soft, @ cloth to clean the dirt before using it.
• This message nlay also appear when condensation occurs. In this case. do not initialize the disc: turn the DVD Video
Camera off. wait until it dries out, and then tnm it on again.
• Initialization will delete all data on disc.
*3
• This message may also appear when dirt adheres to disc. Remove the disc and then use a soft, dry cloth to clean
the dirt be:[\_reusing it.
• This message may also appear when condensation occurs. Wait until the DVD Video Camera dries ouL and then
turn it on again.
• This message will appear when a single-sided disc is inserted inreverse. Reinsert the disc correctly. (Insert the disc
with the label printed snrface facing the outside.)
157
Loading ...
Loading ...
Loading ...