Loading ...
Loading ...
Loading ...
When the DVD Video Camera is connected to PC:
No drive icon appears on The DVD Video Camera is not turned on.
PC. Check the power supply. 50
Driver is not properly recognized.
Turn PC off and on again. If the drive icon still does not appear, use
"Refresh driver" in Device Manager to reinstall the driver.
Turn PC off and then disconnect the USB cable. Turn PC on again,
and then use the USB cable to connect the DVD Video Camera to
PC.
Make sure the USB cable is completely plugged into this DVD Video
Camera.
If a yellow 'T' mark is attached to some device in Windows ® Device
Manager, uninstall the USB device driver, and then reinstall it,
following the procedure on page 133.
Error occurs in playback Iferror occurs with USB connection, the transfer rate is not sufficient.
of DVDVideoCameraon It is recommended that you use a USB terminal conforming to 148
PC. USB2.0 when connecting the DVD Video Camera.
Application is Turn the PC and DVD Video Camera off, and try again.
abnormally run on PC.
Error occurs during The temperature of DVD Video Camera istoo high dueto continuous
writing to DVD-R disc. operation.
Disconnect the DVD Video Camera from PC once, remove the disc
from the DVD Video Camera, and then turn it off. After a few
moments, connect them again and write to a brand-new disc.
Transfer of images stops. Connect the DVD Video Camera to another USB terminal of PC. If
your PC is a desktop type, it is recommended that you use USB
terminal on the back of PC.
DVD-RAM/R/RW drive This problem may be solved if the software related to DVD-RAM/R/
built into PC cannot be RW of your PC is upgraded, or if the DVD-RAM driver is uninstalled.
used after the provided However, with Windows ® 98 Second Edition / Me / 2000
software has been Professional, uninstalling the DVD-RAM driver will make it
installed. _mpossible for the JPEG stills recorded on DVD-RAM on this DVD
Video Camera to be read by the PC.
DVD-R disc cannot be DVD-MovieAIbumSE does not support playback or data read on
played back on DVD- DVD-R disc: Use optional-user provided DVD video playback 138
MovieAtbumSE. software to play back DVD-R disc on PC.
Error appears when Make sure that your PC display adapter (video card) conforms to
starting DVD- DirectX 8.1.
MovieAtbumSE.
Video written to hard disk DVD-MovieAIbumSE cannot edit DVD-VR data stored on hard disk
of PC cannot be edited of PC: Copy the data to another DVD-RAM disc and then edit it.
on DVD-MovieAIbum
copy toot.
Movies are not Make sure the power switch of this DVD Video Camera is set to
recognized by " bU ", " _ " or" fff_ ".
application in PC.
The DISC EJECT lever While the DVD Video Camera is connected to PC, use Explorer to
does not work when the right-click the DVD Video Camera drive icon and execute "Eject".
DVD Video Camera is
connected to PC.
161
Loading ...
Loading ...
Loading ...