Loading ...
Loading ...
Loading ...
Replacing Disc in Round DVD Holder
1 Open SIDE Aofthe Rotmd DVD Holder. and replace
the disc in the holder with the SIDE A mark or label
surface ±;acing up. taking care not to touch the disc
surface.
2 Close SIDE A of the Round DVD Holder, and push it
to lock the release levers at positions (3).
Label surface
SIDE A
mark
1 hlsh the hinged portion of the holder piece marked
SIDE A with thulnb and middle finger, and warp it in
the direction of arrows (4).
When the Hinge of Round DVD Holder Comes Off
2 Fit the hinged portion of the other holder piece into
the warped hinge portion.
SIDE A mark side 4 Hinged portions
Note:
• Handle the disc carefully so that no scratches, dirt,
fingerprints or dust adheres to the recording/playback
surface.
• When not using the Round DVD Holder, store it in a case:
Do not leave a bare holder as is.
• Be careful of dropping or impact: If you drop the Round
DVD Holder, the disc may pop out.
• Do not subject the Round DVD Holder to force.
Approx. 90 °
Disc Cleaning
Use a soft dry cloth to lightly wipe off any dnst. dirt. etc.
adhering to disc, as shown in the figure. Never use
solvent. Do not use thinner, water, anti-static spra3_ etc.
to clean disc.
Use soft lint-free cloth to
clean from inner to outer
circumference in axial
direction, or use puffer to
btow dust off disc, like on
camera lens.
74
Loading ...
Loading ...
Loading ...