Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 91
Click the Source area to select the trigger source, and click the Slope area to select rising or
falling.
Rising
-- Only trigger on the positive slope
Falling
-- Only trigger on the negative slope
Adjust the Upper/Lower Level
The slope trigger requires upper and lower trigger
levels. When the trigger type is slope trigger, click
the trigger descriptor box, the pop-up quick menu
will show two levels.
The upper/lower level can be set in the following
way:
Click the Level Upper area in the quick menu to select the upper level, and then set the level value
by the virtual keypad or the mouse wheel. To set the lower level is similar.
The lower level should always be less than or equal to the upper level. In the trigger descriptor box,
the lower level is displayed.
Loading ...
Loading ...
Loading ...