Loading ...
Loading ...
Loading ...
SDS6000L User Manual
1 4 0 i n t . s i g l e n t . c o m
Trigger Condition
ï‚Ÿ
Start
-- The oscilloscope triggers at the beginning of the frame.
ï‚Ÿ
Remote
-- The oscilloscope triggers on a remote frame with a specified ID. ID, ID Bits (11-bit or
29-bit), and Curr ID Byte (1st, 2nd, 3rd, or 4th byte) can be set. Curr ID Byte is used to specify the
byte to be adjusted when using the mouse wheel.
ï‚Ÿ
ID
-- The oscilloscope triggers on the data frame that matches the specified ID. ID, ID Bits (11-bit
or 29-bit), and Curr ID Byte (1st, 2nd, 3rd, or 4th byte) can be set.
ï‚Ÿ
ID + Data
-- The oscilloscope triggers on the data frame that matches the specified ID and data.ID,
ID Bits (11-bit or 29-bit), Curr ID Byte (1st, 2nd, 3rd, or 4th byte), Data1, and Data2 can be set.
ï‚Ÿ
Error
-- The oscilloscope triggers on the error frame.
✓ Error Frame
✓ Stuff Bit Error
✓ CRC Mismatch Error: The oscilloscope triggers when the calculated CRC does not match the
transmitted CRC.
✓ Stuff Bit Cnt Err: Effective only when ISO is turned on, the oscilloscope triggers when the stuff
bit count is incorrect.
✓ Stuff Bit Cnt Par. Err: Effective only when ISO is turned on, the oscilloscope triggers when the
polarity of the stuff bit count is incorrect.
14.8.3 CAN FD Serial Decode
The configuration of CAN FD decoding is similar to that of I2C decoding.
On the bus:
ï‚Ÿ ID is displayed in green.
ï‚Ÿ BRS (Bit Rate Switch) is displayed in light yellow.
ï‚Ÿ ESI (Error State Indicator) is displayed in blue.
ï‚Ÿ L (Data Length) is displayed in light yellow.
ï‚Ÿ D (Data) is displayed in white.
ï‚Ÿ CRC is displayed in blue.
ï‚Ÿ Ack is displayed in pink.
ï‚Ÿ The red point at the end of a segment indicates there is not enough space on the display to
show the complete content of a frame and some content is hidden.
Loading ...
Loading ...
Loading ...