Loading ...
Loading ...
Loading ...
SDS6000L User Manual
36 i n t . s i g l e n t . c o m
5.6 Power on
The SDS6000L provides two ways to power on, which are:
Auto Power-on
When the “Auto Power-on” option is enabled, once the oscilloscope is connected to the AC power
supply through the power cord, the oscilloscope boots automatically. This is useful in automated or
remote applications where physical access to the instrument is difficult or impossible.
Steps for enabling the "Auto Power-on" function:
Utility > Menu > System Setting > Auto Power On
Power on by Manual
When the " Auto Power on” option is disabled, the power button on the front panel is the only control
for the power state of the oscilloscope.
5.7 Shut down
Press the power button for one second to turn off the oscilloscope. Or follow the steps below:
Utility > Shutdown
Note:
The front panel Power button does not disconnect the oscilloscope from
the AC power supply. To disconnect the instrument from the mains, turn off
the power switch on the rear panel of the instrument. The power cord should
be unplugged from the AC outlet if the scope is not to be used for an
extended period. The standby power consumption of the 4-channel model is
about 4 W, and that of the 8-channel model is about 8 W.
Loading ...
Loading ...
Loading ...