Loading ...
Loading ...
Loading ...
SDS6000L User Manual
58 i n t . s i g l e n t . c o m
time between the clock and data), it may be necessary to compensate for the skew between channels.
The method of compensation: Probe the same signal simultaneously using two channels (including the
cables or probes that you intend to use for measurements) and adjust the deskew parameter of one
channel until the waveforms of the two channels observed on the screen coincide horizontally.
Before deskew
After deskew
Note:
When the channel with delay compensation is the trigger source, the
trigger delay indicator will not change at any time when the deskew value
changes.
Invert
When invert is enabled, the waveform is rotated 180 degrees around earth potential (0 Volts).
Before invert
After invert
Loading ...
Loading ...
Loading ...