Loading ...
Loading ...
Loading ...
SDS6000L User Manual
34 i n t . s i g l e n t . c o m
5.5.3 LAN
Connect the LAN port to the network with a network cable with an RJ45 connector for remote control.
See the chapter “ Remote Control ” for detailed information on remotely controlling the instrument.
Follow the steps below to set LAN connection:
Utility > Menu > I/O > LAN Config
See section “LAN” for details of the configuration.
5.5.4 External Monitor and Mouse
Connect an external monitor to the HDMI output on the rear panel of the instrument using an HDMI
cable, and connect a mouse to the instrument, then it can be used as a stand-alone oscilloscope.
5.5.5 Auxiliary Output
When Mast Test is enabled, the port outputs the pass / fail signal, otherwise, it outputs the trigger
indicator. The trigger indicator can be used to measure the waveform capture rate.
See the chapter "Mask Test" for more details on the pass / fail output.
Loading ...
Loading ...
Loading ...