Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 1 4 5
14.10 MIL-STD-1553B Trigger and Serial Decode
This section covers triggering and decoding MIL-Standard 1553B signals. Please read the following
for more details: "MIL-STD-1553B Signal Settings" and "MIL-STD-1553B Serial Decode".
14.10.1 MIL-STD-1553B Signal Settings
Connect the MIL-STD-1553B signal to the oscilloscope, set the mapping relation between channels
and signals, and then set the threshold level of each signal. The process of specifying the source and
threshold is similar to "I2C Signal Settings"
14.10.2 MIL-STD-1553B Serial Decode
The configuration of MIL-STD-1553B decoding is similar to that of I2C decoding.
On the bus:
ï‚Ÿ C/S the Command/Status word is displayed in green.
ï‚Ÿ RTA the RT address is displayed in the frame and displayed in light yellow.
ï‚Ÿ C/S Data is displayed in the frame and is displayed in white.
ï‚Ÿ The data word is displayed in yellow and the data is displayed in the frame and displayed in
white.
ï‚Ÿ The Check Code is displayed in the frame and displayed in blue.
In the decoding list view:
 Time— The horizontal offset of the current data frame head relative to the trigger position.
 RTA— The RT address
Loading ...
Loading ...
Loading ...