Loading ...
Loading ...
Loading ...
SDS6000L User Manual
2 4 2 i n t . s i g l e n t . c o m
Turn Off
-- Determines the time it has taken for the power supply to be turned off to fall to a certain
percentage of its maximum output voltage. The turn off time is between T2 and T1, where:
T1 = When the input voltage finally falls to a certain percentage (usually 10%) of its maximum amplitude
T2 = When the output DC voltage finally falls to a certain percentage (usually 10%) of its maximum
amplitude
Connection Guide
Click Signal > Connection Guide to recall the connection guide of turn on/turn off, as shown in
the figure below. Please follow the instructions in this figure for connection. Click the icon on the top
right of the guide to close.
26.10 Transient Response
Transient response analysis can determine the response speed of the output voltage of the power
supply to the change of the output load. This time starts from the first time that the output voltage exits
the stable band and ends at the last time that the output voltage enters the stable band.
Signal Settings
Click Signal to recall signal settings dialog box:
Loading ...
Loading ...
Loading ...