Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 3 0 1
Click Upgrade in the upgrade dialog box to start the upgrade. The oscilloscope first copies the
upgrade file (*.ads) to the local memory and parses it. If the parse succeeds, it will show the following
dialog. Users can choose Cancel to cancel the upgrade or Reboot to restart the oscilloscope
immediately and continue the upgrade. Otherwise, the oscilloscope will restart automatically to finish
the upgrade.
After the reboot, check if the version number is in the "Information System".
Warning:
Do not turn off the power during upgrading. Otherwise, the
oscilloscope may not boot up!
33.5.2 Self-Calibration
The self-calibration program can quickly calibrate the oscilloscope to reach the best working state and
the most precise measurement. It is recommended to perform a self-calibration if the change of ambient
temperature is more than 5
℃
.
Note:
Make sure the oscilloscope has been warmed up or operated for more
than 30 minutes before the self-calibration.
Loading ...
Loading ...
Loading ...