Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 17
The position of the oscilloscope should allow easy access to the socket. To make the oscilloscope
completely power off, unplug the instrument power cord from the AC socket.
The power cord should be unplugged from the AC outlet if the scope is not to be used for an extended
period.
CAUTION:
The outer shells of the front panel terminals (C1~C8, EXT) are
connected to the instrument’s chassis and therefore to the safety ground.
2.6 Cleaning
Clean only the exterior of the instrument, using a damp, soft cloth. Do not use chemicals or abrasive
elements. Under no circumstances allow moisture to penetrate the instrument. To avoid electrical
shock, unplug the power cord from the AC outlet before cleaning.
Warning:
Electrical Shock Hazard!
No operator serviceable parts inside. Do not remove covers.
Refer servicing to qualified personnel
2.7 Abnormal Conditions
Do not operate the scope if there is any visible sign of damage or has been subjected to severe
transport stresses.
If you suspect the scope’s protection has been impaired, disconnect the power cord and secure the
instrument against any unintended operation.
Proper use of the instrument depends on the careful reading of all instructions and labels.
Loading ...
Loading ...
Loading ...