Siglent SDS6000L User Manual

Loading ...

SDS6000L User Manual

int. s i g l e n t . c o m 35

5.5.6 Reference Input and Output

The device can use the internal 10 MHz clock or a 10 MHz clock from another instrument or source

using the 10 MHz In port as the reference. The reference clock is a 10 MHz square wave and can be

output from the 10 MHz Out port for synchronizing other instruments. To set the reference clock by

following the steps:

Utility > Menu > IO > Clock Source

See the "Clock Source" section for details.

5.5.7 Waveform Generator

Activate the SDS6000L-FG option to support the waveform generator function.

Perform Utility > AWG Menu to set the waveform.

See chapters “Waveform Generator” and “Bode Plot” for more relative information.

5.5.8 Logic Probe



To connect the logic probe:

Insert the probe, with the correct side facing up, until you hear a

“click”.



To remove the logic probe:

Depress the buttons on each side of the probe, then pull out it.

See the chapter “Digital Channels” for more information.

Loading ...

Siglent SDS6000L Low Profile Digital Oscilloscope