Siglent SDS6000L User Manual

Loading ...

SDS6000L User Manual

int. s i g l e n t . c o m 1 4 9

If you set the trigger condition to Slow Channel:

 ID can be selected in the hexadecimal range of 0x0 to

0xF (short serial / enhanced serial with 4 bits ID) or 0x00 to

0xFF (enhanced serial with 8 bits ID). If it is selected as

"0xXX", the ID is ignored.

 Compare Type can be specified as Equal, Not Equal,

Less than, Less or Equal, Greater than, Greater or Equal,

in Range of, or out of Range.

 Data can be selected in the hexadecimal range of 0x00

to 0xFF (short serial) or 0x0000 to 0xFFFF (enhanced serial

with 4 bits ID) or 0x000 to 0Xfff (enhanced serial with 8 bits

ID). If it is selected as "0xXX", the data is ignored.

Error

-- The oscilloscope triggers on the error frame. Errors include Successive Sync Pulses Error,

Pulse Period Error, Fast Channel CRC Error, Slow Channel CRC Error, All CRC Errors.

 Successive Sync Pulses Error: Triggers on a sync pulse whose width varies from the previous

sync pulse's width by greater than 1/64 (1.5625%, as defined in the SENT specification).

 Pulse Period Error: Triggers if a nibble is either too wide or too narrow (for example, data nibble <

12 (11.5) or > 27 (27.5) ticks wide). Sync, S&C, data, or checksum pulse periods are checked.

 Fast Channel CRC Error: Triggers on any Fast Channel Message CRC error.

 Slow Channel CRC Error: Triggers on any Slow Channel Message CRC error.

 All CRC Errors: Triggers on any CRC error, Fast or Slow.

Loading ...

Siglent SDS6000L Low Profile Digital Oscilloscope