Loading ...
Loading ...
Loading ...
SDS6000L User Manual
1 3 6 i n t . s i g l e n t . c o m
14.7 FlexRay Trigger and Serial Decode
This section covers triggering and decoding FlexRay signals. Please read the following for more details:
"FlexRay Signal Settings", "FlexRay Trigger" and "FlexRay Serial Decode".
14.7.1 FlexRay Signal Settings
Connect the FlexRay signal to the oscilloscope, and then set the threshold level of the signal. The
process of specifying the source and threshold is similar to "I2C Signal Settings".
In the BusConfig menu of the trigger and decode, the baud rate can be set to: 2.5 Mb/s, 5.0 Mb/s,
10.0 Mb/s, or Custom.
The method of copying settings is the same as I2C signal settings. See "I2C Signal Settings" for details.
14.7.2 FlexRay Trigger
Click Trigger Setting in the FlexRay trigger dialog box to set the trigger conditions:
ï‚Ÿ
TSS
-- The oscilloscope triggers on the transmission start sequence.
ï‚Ÿ
Frame
-- The oscilloscope triggers on the frame.
✓ Set Frame header indicators: Payload preamble indicator, null frame indicator, sync frame
indicator, startup frame indicator.
✓ Click ID to set the frame ID by the mouse wheel or virtual keypad. The range of ID is 0x000
to 0x7ff.
✓ Click Compare Type to select "=", ">" or "<". When setting the Compare Type as "=",
Loading ...
Loading ...
Loading ...