Loading ...
Loading ...
Loading ...
SDS6000L User Manual
1 3 4 i n t . s i g l e n t . c o m
14.6 LIN Trigger and Serial Decode
This section covers triggering and decoding LIN signals. Please read the following for more details:
“LIN Signal Settings”, “LIN Trigger” and “LIN Serial Decode”.
14.6.1 LIN Signal Settings
Connect the LIN signal to the oscilloscope, and then set the threshold level of the signal. The process
of specifying the source and threshold is similar to “I2C Signal Settings”.
In BusConfig menu of trigger and decode, baud rate can be set to: 600 b/s,1200 b/s, 2400 b/s, 4800
b/s, 9600 b/s, 19200 b/s or Custom.
The method of copying settings is the same as I2C signal settings. See “I2C Signal Settings” for details.
14.6.2 LIN Trigger
Click Trigger Setting in the LIN trigger dialog box to set the trigger conditions:
Break
-- The oscilloscope triggers at the beginning of the frame.
ID
-- The oscilloscope triggers on the frame that matches the specified ID, which ranges from 0x00
to 0x3f.
ID & Data
-- The oscilloscope triggers on the frame that matches the specified ID and data.ID,
Data1, and Data2 can be set.
Data Error
-- The oscilloscope will trigger when a data error happens.
Loading ...
Loading ...
Loading ...