Siglent SDS6000L User Manual

Loading ...

SDS6000L User Manual

11 6 i n t . s i g l e n t . c o m

Perform Analysis > Decode to turn on the serial decode dialog box:

A. Set the list of decoded results

B. Select the bus to set, Bus1 and Bus2

C. Turn on/off the bus

D. Set the bus display format (Binary, Decimal,

Hex, and ASCII)

E. Select the serial bus protocol

F. Click to set the signal, including the mapping

relation between channels and bus signals,

and the thresholds. This is similar to the signal

setting of a serial trigger.

G. Configure the bus protocol

H. Synchronize the settings between a serial

trigger and decode

Below are detailed descriptions of the trigger and decode steps for each protocol.

 I2C Trigger and Serial Decode

 SPI Trigger and Serial Decode

 UART Trigger and Serial Decode

 CAN Trigger and Serial Decode

 LIN Trigger and Serial Decode

 FlexRay Trigger and Serial Decode

 CAN FD Trigger and Serial Decode

 I2S Trigger and Serial Decode

 MIL-STD-1553B Trigger and Serial Decode

 SENT Trigger and Serial Decode

 Manchester Serial Decode

Loading ...

Siglent SDS6000L Low Profile Digital Oscilloscope