Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 2 6 5
Jitter Analysis Dialog Box
A. Turn on/off the Jitter Analysis
B. Set the display mode, including Waveform
and Eye diagram
C. The signal setting, including source and
trigger level
D. Quick view. After setting the channel
source and performing a quick view, the
oscilloscope will automatically adjust the
vertical/horizontal scale and trigger level,
the frequently-used measurement types
will be recalled as well
E. Clock recovery options, including Constant
Frequency and PLL
F. Jitter decomposition setting
G. Set the measurement
29.2 Signal Configuration
Click Signal to set the channel source and trigger level. The setting is similar to Eye Diagram. Refer
to the “Signal Setting” section in the "Eye Diagram" chapter for details.
The type of measured signal can be pre-set to be data or clock in the jitter analysis, then the
oscilloscope will execute corresponding optimization processing for the signal type, which is different
from Eye Diagram.
Loading ...
Loading ...
Loading ...