Loading ...
Loading ...
Loading ...
SDS6000L User Manual
int. s i g l e n t . c o m 11
contains capacitors, power supply, transformers, and other energy storage devices, which may cause
high voltage damage. The internal devices of the equipment are sensitive to static electricity, and direct
contact can easily cause irreparable damage to the equipment. It is necessary to return to the factory
or the company's designated maintenance organization for maintenance. Be sure to pull out the power
supply when repairing the equipment. Live line operation is strictly prohibited. The equipment can only
be powered on when the maintenance is completed and the maintenance is confirmed to be successful.
Identification of Normal State of Equipment.
After the equipment is started, there will be no alarm information or error information at the interface
under normal conditions. If there is a pop-up window or button during the scanning process or there is
an alarm or error prompt, the device may be in an abnormal state. You need to view the specific prompt
information. You can try to restart the instrument to see if it corrects the error condition. If the fault
information is still in place, do not use the instrument for testing. Contact the manufacturer or the
maintenance department designated by the manufacturer to carry out maintenance before reusing the
product.
Not Operate with Suspected Failures.
If you suspect that there is damage to the instrument, please let qualified service personnel check it.
Avoid Circuit or Wire Exposed Components Exposed.
Do not touch exposed contacts or components when the power is on.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep the surface of the instrument clean and dry.
Only probe assemblies that meet the requirement of UL61010-031 and CAN/CSA-C22.2
No.61010-031 shall be used.
Only a lithium battery with the same specifications as the original battery should be used to
Loading ...
Loading ...
Loading ...