Loading ...
Loading ...
Loading ...
SDS6000L User Manual
86 i n t . s i g l e n t . c o m
13.2 Trigger Setup
Click the trigger descriptor box to display the quick menu of trigger settings. The trigger setup dialog
box is displayed on the right side of the screen.
Quick menu
A. Click the level region and roll the mouse wheel to
adjust the trigger level. Click the region again and
the virtual keypad will be available
B. â–² to increase and â–¼ to decrease the trigger level
C. Set the trigger level to the vertical center of the
waveform automatically
D. Set the trigger mode to "Auto"
E. Set the trigger mode to "Single"
F. Set the trigger mode to "Normal"
G. Perform a force trigger
Trigger setup dialog box:
A. Select trigger type
B. Select the trigger source
C. Select the trigger slope (When the trigger type is
"Edge", "Slope" and other specific types)
D. Set holdoff (None/Time/Events)
E. Set trigger coupling mode (DC/AC/LF Reject/HF
Reject)
F. Enable/disable Noise Rejection. When Noise
Reject is on, the trigger hysteresis is increased,
so the noise immunity of the trigger circuit is
better. As a compromise, the trigger sensitivity
degrades
G. Set the Zone trigger
Loading ...
Loading ...
Loading ...