Loading ...
Loading ...
Loading ...
IP Camera Setup
73
2
2.2.3 Configuring General Settings
You can configure the general settings, such as for video recording.
Figure 2-8
Network Time Out: When network disconnection exceeds the specified time period, the status
icon on the IP Device List (Figure 2-1) becomes yellow.
Live View Decode Postpone Time: Specify the number of milliseconds to postpone live view
decoding. When the network connection with the IP device is unstable or when the time length
between frames is not evenly distributed, postponing the live view decoding will make the video
smoother. Note this function is only available for configuration when the camera is disconnected.
Frames to Keep in Live View Buffer: Specify the number of frames to keep in the live view buffer.
When CPU performance is insufficient, you can reduce the number of frames kept in buffer to
achieve a real-time appearance by dropping frames. This setting does not affect the frame rate of
the recorded videos.
On Demand Display: Enable automatic adjustment of live view resolution. For details, see On
Demand Display later in this chapter.
Recording Codec Format: Specify whether to record in standard or GeoVision codec.
Automatically Adjust DST: When enabled, the time on the GV-IP Device Web interface will be
synchronized with the time of GV-VMS when DST period starts or ends on GV-VMS.
Loading ...
Loading ...
Loading ...