Loading ...
Loading ...
Loading ...
Remote Viewing
223
7
7.2.6 UPnP Settings
The WebCam Server supports UPnP technology (Universal Plug and Play) to allow automatic port
configuration to your router. UPnP must be enabled both on your operating system and your router.
Enabling UPnP on the WebCam Server:
1. On the main screen, click Home
> Toolbar > Network > WebCam Server. The
Server Setup dialog box appears.
2. Click the Server tab and click Detect UPnP. This dialog box appears.
Figure 7-8
3. Click Searching to search the UPnP-enabled routers.
4. If your server is installed with multiple routers, select one from the UPnP Router drop-down list.
5. If you server is installed with multiple network adapters, select one from the drop-down list under
the Searching button.
6. Click Configure to automatically configure the communication ports on the router.
Note: If you don’t use the default ports, modify the related ports in the Server Setup dialog box
(Figure 7-4) and then click OK. Re-open the dialog box and follow the above steps to configure your
router.
Loading ...
Loading ...
Loading ...