Loading ...
Loading ...
Loading ...
152
9. Click Test and move an object through the camera view to see if its movement is tracked or not.
There are two major settings you have to observe in the test. 1) Tracking: Observe if the target
shown in the defined detection region is being tracked with a highlighted mask, and magnified
automatically in the left (PTZ) image. If not, increase the sensitivity degree. 2) Zooming: Observe
if the target is magnified in the left (PTZ) image clearly. If not, use the Live Tuning buttons to
adjust the level of zooming.
10. Click OK to apply the settings.
11. To start object tracking, click Toolbar
, select Tools and select Object Tracking Start.
Tip: You can interrupt the PTZ tracking and take over the camera control by using PTZ Control
Panel, PC’s keyboard and GV accessories such as GV-Keyboard, GV-IR Remote Control, and
GV-Joystick. When the controlling device or panel is inactive for over 5 seconds, the PTZ camera will
go back for tracking.
Note: When multiple objects are moving at the same time, the camera will track the object with the
largest area.
Loading ...
Loading ...
Loading ...