Loading ...
Loading ...
Loading ...
Remote Viewing
231
7
Alert Sound: Activates the computer noise alarm on motion and input-triggered detection.
Auto Snapshot: The program will take a snapshot every 5 seconds on motion and
input-triggered detection.
File Path: Assigns a path to save the snapshots.
2. Click OK to apply the above settings.
Video and Audio Configuration
To change the video and audio configurations of the connected camera, click the Option button, and
select Video and Audio Configuration.
Figure 7-16
[Camera] Change the video codec, quality and frame rate. The resolution options depend on the
maximum image size set on the connected GV-VMS. For details, see Video Settings in WebCam
Server Settings earlier in this chapter.
[Audio Configure] Enable the microphone and speaker for two-way audio communication. Select
Speaker to access live audio from the server site, and select Microphone to speak to the server site.
Ensure the speaker and microphone are properly installed in the local computer, and the audio settings
(Figure 7-6) are activated on the WebCam Server too. There are three options for audio quality:
Real Time: Transmits simultaneously audio and video but may create sound interruption,
depending on your network condition.
Smooth: Has a smooth sound quality but without audio and video synchronization.
Normal: The default value which has the audio and video effects between Real-Time and Smooth.
Loading ...
Loading ...
Loading ...