Loading ...
Loading ...
Loading ...
I/O
Applications
207
6
6.2.2 Moving PTZ Camera to Preset Points upon Input Trigger
This feature allows you to move the PTZ camera to preset points when an input is triggered. Select an
input number to be set up.
Figure 6-12
Preset Go by I/O: Enable the option and click the Arrow button to select your PTZ camera from
the drop-down list.
Alarm On: Moves the PTZ camera to a preset point when the input is triggered.
Alarm Off: Moves the PTZ camera to a preset point when the triggered input is off.
Preset Go by I/O - Alarm On Dwell Time: Specify the amount of time the PTZ camera stays at
“Alarm On” preset point, before returning to the “Alarm Off” preset point.
Note: Depending on the capability of the PTZ camera, up to 256 PTZ preset points (ranging from 1 to
256) and addresses (ranging from 0 to 255) can be programmed.
Loading ...
Loading ...
Loading ...