Loading ...
Loading ...
Loading ...
IP Camera Setup
67
2
Port: Modify the video streaming port of 10000 if necessary.
Stream Type: You may have the option of Single Stream or Dual Streams depending on
camera models.
Codec Type: You may have different codec options depending on camera models. If the
selected camera supports dual streaming, the live view codec and recording codec can be set
differently.
Resolution: You may select the different resolutions for live view and recording.
5. Click Apply to add the IP camera to the IP Device List.
6. To connect the added camera, select the checkbox beside the ID column. The Status icon turns
green upon successful connection, with the video resolution and bit rate being displayed in the
correspondent columns.
Figure 2-3
7. To change the number of the camera, click the device’s ID and select a desired number. Note this
function is only available for disconnected cameras.
Note: The indication of status icons is as below.
Connected
The camera is connected.
Connecting
GV-VMS is trying to connect to the camera.
Connection Failed
Unable to connect to the camera. Place the cursor on the red icon to
see the error message.
Inactive Camera
The camera is inactive. Select the checkbox to connect to the
camera.
Started Monitoring
The camera is under monitoring.
Pre-Rec Enabled
Pre-recording is enabled.
Tips: You can access the camera’s own configuration interface by right-clicking the IP camera and
selecting Remote Camera Setting.
Loading ...
Loading ...
Loading ...