Loading ...
Loading ...
Loading ...
68
2.1.2 Scanning for Cameras
1. To detect for IP devices on the LAN, click Scan Camera in the IP Device Setup (Figure 2-1).
The Scan Camera dialog box appears.
2. Click Start Scan. The IP devices detected are displayed.
3. Double-click the IP device you wish to connect to, type its username and password and click OK.
Figure 2-2 appears.
4. Click Apply. The IP camera is added to the IP Device List and automatically enabled for
connection.
2.1.3 Mapping GV-IP Cameras using GV-IP Device Utility
GV-IP Device Utility detects all available IP devices within the LAN and allows users to map detected
cameras to the specified channels. Users can then export the device list and import it into GV-VMS. In
addition, GV-IP Device Utility also lets users to quickly set IP addresses, upgrade firmware,
export/import device settings for and reboot IP devices.
Click IP Device Utility
in the IP Device Setup (Figure 2-1). All the available IP cameras on the
LAN are detected and listed in the window.
Figure 2-4
To map IP cameras to the channels of GV-VMS, see 7. Assigning Camera Channels for
GV-DVR / NVR / VMS in GV-IP Device Utility Guide
.
Loading ...
Loading ...
Loading ...