Loading ...
Loading ...
Loading ...
Configuring Main System
31
1
1.5 Start Monitoring
After setting up the following functions, it is important to start monitoring in order for the functions to
start: Recording, Video Analysis, Motion Event Trigger and Schedule.
To start monitoring, click Home
> Toolbar > Monitor and select one of the options:
Figure 1-18
Start Schedule Monitoring: If you want to start running a created schedule, select Start
Schedule Monitoring. The schedule takes precedence over the current settings, and these
functions will start and stop according to the schedule: Recording, Video Analysis, I/O, PTZ Auto
Functions, Motion Event Trigger and Network Connections with Center V2 / Vital Sign Monitor. For
details on creating a schedule, see Schedule later in this chapter.
Start All Monitoring: Starts monitoring on all cameras to initiate recording and related functions.
I/O Monitoring: Starts I/O monitoring to activate I/O functions. I/O Monitoring is only available
after at least one I/O device is set up. For details on setting an I/O device on GV-VMS, see Setting
up I/O Devices in Chapter 6.
Camera#: Starts monitoring of selected cameras. You can also start monitoring individual
cameras by right-clicking the camera in the Content List and select Monitor.
Note: Motion detection and I/O trigger will only be registered in the System Log if monitoring is
started. You will also need to enable Register Motion Event in the Advanced Motion Detection
Setup dialog box (Figure 1-10) and Register Input Event in the I/O Application Setting (Figure 6-10).
Loading ...
Loading ...
Loading ...