Loading ...
Loading ...
Loading ...
Configuring Main System
21
1
1. Open the Recording Setting dialog box (Figure 1-6), select a camera and click . This dialog box
appears.
Figure 1-10
2. You can refine motion detection by setting either Object Size or Region Sensitivity.
◼ Define Object: Limit motion detection to objects within a size range. Select User-defined and
set the Min. Object Size and Max. Object Size in the respective drop-down lists.
◼ Set Region Sensitivity: Set different detection sensitivities for different parts of the camera
image. Uncheck User-defined, adjust the sensitivity level by moving the slider, and drag an
area on the image. You can create several areas with different sensitivity levels. You can use
the Add/Cut Mask buttons to create irregular shapes. By default, the entire
image is set to sensitivity level 9.
3. To ignore motion in specific areas of the image, click Mask Region, and drag areas on the image.
4. The following options are available to further reduce false alarm:
◼ Noise Tolerance: Enable to ignore video noise and move the slider to adjust the level. The
higher the level, the more tolerant the system is to video noise.
◼ Ignore environmental changes: Ignore environmental changes such as rain or snow. When
this option is selected, objects moving steadily and repeatedly in the same direction for over
1.5 seconds are filtered out and ignored.
◼ Minimum Duration: Set the minimum duration for which motions must persist for the system
to issue a motion alarm. Set the minimum duration in seconds (up to 60).
Loading ...
Loading ...
Loading ...