Loading ...
Loading ...
Loading ...
Configuring Main System
17
1
1.3.2 Setting up Recording Settings for Individual Cameras
You can configure the recording mode and video storage location for the selected cameras only.
Figure 1-8
1. Select the camera you want to configure. Hold the Shift key to select multiple cameras if needed.
2. Under Record Type, select Disable, Motion Detection or Round-the-Clock.
3. You can set different recording frame rates. Select Urgent Event to record in full frame rate.
Select General Event to record only the key frames.
The frame rate for General Event and Urgent Event can be defined in the camera’s General
Setting dialog box (Figure 2-13). Normally, you would set a higher frame rate for Urgent Events
(e.g. full frame) and a lower frame rate for General Events (e.g. key frame only).
4. If there are more than one storage locations, select Storage to specify where to store the
recordings. See Setting up the Video Storage Location later in this section.
5. Under Stream, select the stream(s) you want to record. By default, Main Stream is set to record
high-resolution video images. Select Sub Stream to record lower-resolution video images. Select
Main Stream and Sub Stream to record both streams simultaneously.
Loading ...
Loading ...
Loading ...