Loading ...
Loading ...
Loading ...
Useful Utilities
287
9
9.4.6 Starting the Server
To configure the server and start the service, follow the steps below.
1. Click the Server Setup button (No. 7, Figure 9-9). This dialog box appears.
Figure 9-22
2. Under Security Setting, type the Authorized ID and Authorized Password which will be used for
the client GV-VMS to log into the Authentication Server.
3. Click OK to apply the settings.
4. Click the Start/Stop Service button (No. 6, Figure 9-9) to start the services.
Optionally, you can configure the following settings before starting the Authentication Server:
[Network Setting]
Server Port: The default port number is 3663. To use UPnP for automatic port configuration to
your router, click the Arrow button. For details, see UPnP Settings in Chapter 7.
Automatic Failover Support: Select and click the Setting button to configure up to 2
Authentication Servers in case the primary Authentication Server fails. If fails, the second or the
third server will take over the connection from clients and provide uninterrupted services. Note the
settings of Authorized ID and Authorized Password on the failover server must match those of the
primary server.
Loading ...
Loading ...
Loading ...