Loading ...
Loading ...
Loading ...
You can customize your Instrument Cluster Display with
up to five tiles that may consist of the following:
NOTE:
These options may vary based on your vehicle trim
level.
•
Navigation
○ Map (Route Set / Route Not Set)
○ TripA/TripB
•
Vehicle Info
○ Coolant Temp
○ Trans Temp
○ Oil Temp
○ Oil Pressure
○ Battery Voltage
○ Oil Life
○ Tire Pressure
○ Fuel Economy
•
Driver Info – If Equipped
○ Posted Speed Limit Sign
○ Driver Assist
•
Audio
○ Audio Info
•
Off Road – If Equipped
○ Selec-Terrain / Air Suspension Status
○ Steering Angle
○ Pitch
○ Roll
○ Trailer Tow – If Equipped
○ Trailer Trip
○ Trailer Brake
○ Trailer Tire Pressure
ENGINE OIL LIFE RESET
Use this QR code to access your digital
experience.
Oil Level
The 3.0L engine does not have a tradi-
tional “dipstick” and there is no need to
manually check the oil level
page 295.
Oil Change Required
Your vehicle is equipped with an engine oil change indi-
cator system. The “Oil Change Required” message will
display in the instrument cluster display for five sec-
onds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil
change indicator system is duty cycle based, which
means the engine oil change interval may fluctuate,
dependent upon your personal driving style and envi-
ronmental conditions.
Unless reset, this message will continue to display each
time the ignition is placed in the ON/RUN position. To
turn off the message temporarily, push and release the
OK or arrow buttons. To reset the oil change indicator
system (after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter ‘n Go™ Ignition
Use the steering wheel instrument cluster display con-
trols for the following procedure(s):
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the engine).
2. Push and release the down
arrow button to
scroll downward through the main menu to “Vehicle
Info”.
3. Push and release the right
arrow button to
access the “Oil Life” screen.
4. Push and hold the OK button to reset oil life. If con-
ditions are met, the gauge and numeric display will
update to show 100%. If conditions are not met a
pop-up message of “To reset oil life engine must be
off with ignition in run” will be displayed (for five
seconds), and the user will remain at the Oil Life
screen.
5. Push and release the up
or down arrow
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Scan me
GETTING TO KNOW YOUR INSTRUMENT PANEL 97
3
Loading ...
Loading ...
Loading ...