Loading ...
Loading ...
Loading ...
Suspension Display Messages Mode
The “Suspension Display Messages” setting allows you
to only display suspension warnings instead of all sus-
pension messages (i.e., “Normal Height Achieved”)
page 182.
NOTE:
This mode is intended to be enabled with the engine
running.
Wheel Alignment Mode
Before performing a wheel alignment this mode must
be enabled which will move the vehicle to Normal Ride
Height and disable the air suspension during the align-
ment
page 182.
NOTE:
This mode is intended to be enabled with the engine
running.
If equipped with a Uconnect Touchscreen Radio, all
enabling/disabling of air suspension features must be
done through the radio
page 182.
INSTRUMENT CLUSTER DISPLAY
MESSAGES
When the appropriate conditions exist, a message will
appear in the instrument cluster
page 95.
OPERATION
The indicator lights 1 through 5 will illuminate to show
the current position of the vehicle. Flashing indicator
lights will show a position which the system is working
to achieve. When raising, if multiple indicator lights are
flashing while raising, the highest flashing indicator
light is the position the system is working to achieve.
When lowering, if multiple indicators are flashing while
lowering the lowest solid indicator light is the position
the system is working to achieve.
Toggling up once moves the suspension one position
higher from the current position, assuming all condi-
tions are met (i.e., engine running, speed below thresh-
old, etc.). Toggle up can be pushed multiple times. Each
toggle up will raise the requested level by one position
up to a maximum position of OR2 or the highest posi-
tion allowed based on current conditions (i.e., vehicle
speed, etc.).
Toggling down once moves the suspension one position
lower from the current level, assuming all conditions
are met (i.e., engine running, doors closed, speed
below threshold, etc.). Toggle down can be pushed mul-
tiple times. Each toggle down will lower the requested
level by one position down to a minimum of Park mode
or the lowest position allowed based on current condi-
tions (i.e., vehicle speed, etc.)
Automatic height changes will occur based on vehicle
speed and the current vehicle height. The indicator
lights and instrument cluster display messages will
operate the same for automatic changes and user
requested changes.
•
Off-Road 2 (OR2) – Indicator lights 1 through 5 will
be illuminated.
•
Off-Road 1 (OR1) – Indicator lights 2 through 5 will
be illuminated.
•
Normal Ride Height (NRH) – Indicator lights
3 through 5 will be illuminated.
•
Aero Height – Indicator lights 4 and 5 will be
illuminated.
•
Entry/Exit Height – Indicator light 5 will be
illuminated.
•
Transport Mode – No indicator lights will be illumi-
nated. Driving or deselecting the mode in the
Uconnect system will disable Transport mode.
•
Tire/Jack Mode – Indicator lights 1 and 5 will be
illuminated. Driving or deselecting the mode in the
Uconnect system will disable Tire/Jack mode.
•
Wheel Alignment Mode – Indicator lights 4 and
5 will be illuminated. Driving or deselecting the
mode in the Uconnect system will disable Wheel
Alignment mode.
FUEL SAVER TECHNOLOGY 6.4L ONLY —
IF EQUIPPED
This feature offers improved fuel economy by shutting
off four of the engine's eight cylinders during light load
and cruise conditions. The system is automatic with no
driver inputs or additional driving skills required.
NOTE:
This system may take some time to return to full func-
tionality after a battery disconnect.
POWER STEERING
The electric power steering system will provide
increased vehicle response and ease of maneuverabil-
ity. The electric power steering system adapts to differ-
ent driving conditions.
STARTING AND OPERATING 127
4
Loading ...
Loading ...
Loading ...