Jeep® 2024 WAGONEER WAGONEER User Manual

Loading ...

8. Use the touchscreen radio settings and switch off

Tire/Jack mode. Make sure the vehicle returns to

Normal Ride Height. Perform a visual inspection of

the trailer and weight-distributing hitch to confirm

the manufacturers’ recommendations have been

met.

9. The vehicle can now be driven.

Measurement Example Example Height (mm)

H1 925

H2 946

H2-H1 21

(H2-H1)/2 10.5

(H2-H1)/2 + H1 935.5

NOTE:

For all towing conditions, we recommend towing with

TOW/HAUL mode engaged (if equipped).

RECOMMENDED DISTRIBUTION HITCH

ADJUSTMENT — NON-AIR SUSPENSION

EQUIPPED VEHICLES

1. Verify that the vehicle is at the normal ride height.

2. Position the vehicle on a level surface in preparation

to connect to the trailer (do not connect the trailer).

3. Measure the height from the top of the front wheel

opening on the fender to the ground; this is height

H1.

4. Attach the loaded trailer to the vehicle without the

weight distribution bars connected.

5. Ensure the trailer is properly secured to the hitch,

including the safety chains, lighting, and trailer

brake controls.

6. Cautiously drive the vehicle and trailer at

20-25 mph (30-40 km/h) for approximately 3 miles

(5 km) to re-level the suspension.

7. Park the vehicle and trailer on a level surface.

8. Measure the height from the top of the front wheel

opening on the fender to the ground; this is height

H2.

9. Install and adjust the tension in the weight-

distributing bars per the manufacturers’ recommen-

dations so that the height of the front fender is

approximately (H2-H1)/2+H1 (about 1/2 the differ-

ence between H2 and H1 above normal ride height

[H1]).

10. Perform a visual inspection of the trailer and

weight-distributing hitch to confirm the manufac-

turers’ recommendations have been met.

11. The vehicle can now be driven.