Loading ...
Loading ...
Loading ...
•
When the system senses the lane line is being
crossed, the left lane line changes from solid yellow
to flashing yellow (on/off). At this time, vibration is
applied to the steering wheel.
For example: If approaching the left side of the lane
the steering wheel will turn to the right.
NOTE:
•
The Active Lane Management system operates with
similar behavior for a right lane departure.
•
If the turn signal is activated, and the vehicle begins
to depart the lane at the same time the Blind Spot
Monitoring (BSM) system detects another vehicle in
the BSM zones, the system will provide haptic steer-
ing wheel vibration and/or steering assist torque (if
programmed in Uconnect Settings).
CHANGING ACTIVE LANE
MANAGEMENT STATUS
Configurable settings for the Active Lane Management
system are available within the Uconnect system
page 182.
Selectable Warning Types:
•
Vibration Only
•
Steering Assist Only
•
Vibration And Steering Assist
Other configurable settings for this system are for the
intensity of the vibration (high/med/low), steering
assist strength (hi/med/low), and the warning zone
sensitivity (early/medium/late).
NOTE:
•
The system will not apply vibration and/or steering
assist to the steering wheel whenever a safety sys-
tem engages (Anti-Lock Brakes, Traction Control
System, Electronic Stability Control, Forward Colli-
sion Warning, etc.).
•
The Blind Spot Monitoring system will be forced on
when the ALM system is enabled.
•
The ALM system will be suppressed when the Active
Driving Assist system (if equipped) is engaged.
TURN SIGNAL ACTIVATED BLIND
SPOT ASSIST — IF EQUIPPED
When enabled in the Uconnect system and a turn signal
is activated, the corresponding side view mirror camera
will display in the radio. The camera will continue to
display as long as the turn signal is engaged. If “Only
With Trailer” is selected (if equipped), the camera will
only display when a trailer is connected to the vehicle
page 182.
WARNING!
Blind Spot Assist is only an aid to help detect objects
in the blind spot zones and may not provide alerts
when changing lanes under all driving conditions.
Even if your vehicle is equipped with the BSA system,
always check your vehicle's mirrors, glance over your
shoulder, and use turn signals before changing lanes.
Failure to do so can result in serious injury or death.
PARKVIEW REAR BACK UP CAMERA
Your vehicle is equipped with the ParkView Rear Back
Up Camera that allows you to see an on-screen image
of the rear surroundings of your vehicle whenever the
gear selector is put into REVERSE. The image will be
displayed on the Navigation/Multimedia radio display
screen along with a caution note to “Check Entire Sur-
roundings” across the top of the screen. After five sec-
onds this note will disappear. The ParkView camera is
located on the rear of the vehicle above the rear license
plate.
Lane Crossed (Flashing Yellow Line)
STARTING AND OPERATING 159
4
Loading ...
Loading ...
Loading ...