Loading ...
Loading ...
Loading ...
NOTE:
•
Your vehicle is equipped with two key fobs, each can
be linked to either driver’s side memory position
1or2.
•
Front passenger memory settings cannot be linked
toakeyfob.
PROGRAMMING THE MEMORY
FEATURE
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase the selected
profile from memory.
Wagoneer
1. Place the vehicle’s ignition in the ON/RUN position
(do not start the engine).
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat, side mirror, power tilt and tele-
scopic steering column, and radio station presets).
3. Push and release the set (S) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The instrument cluster
display will indicate which memory position has
been set.
Grand Wagoneer
1. Place the vehicle’s ignition in the ON/RUN position
(do not start the engine).
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat, side mirror, power tilt and tele-
scopic steering column, and radio station presets).
3. Press memory button (1) or (2) for two or more sec-
onds. The instrument cluster display will indicate
which memory position has been set.
NOTE:
Memory profiles can be set without the vehicle in PARK,
but the vehicle must be below 5 mph (8 km/h) to recall
a memory profile.
LINKING AND UNLINKING THE KEY
FOB TO MEMORY
Your key fobs can be programmed to recall one of two
saved driver’s side memory profiles.
NOTE:
Before programming your key fobs you must select the
“Personal Settings Linked To Key Fob” feature through
the Uconnect Settings
page 182.
To program your key fobs, perform the following:
Wagoneer
1. Place the vehicle’s ignition in the OFF position.
2. Select a desired driver’s side memory profile, 1 or 2.
3. Once the profile has been recalled, push and
release the set (S) button on the memory switch.
4. Within five seconds, push and release button (1) or
(2) accordingly. “Memory Profile Set” (1 or 2) will
display in the instrument cluster.
5. Push and release the lock button on the key fob
within 10 seconds.
NOTE:
Your key fobs can be unlinked from your driver’s side
memory settings by pushing the set (S) button, and
within 10 seconds, pushing the unlock button on the
key fob.
Grand Wagoneer
1. Place the vehicle’s ignition in the OFF position.
2. Recall the desired memory profile (1 or 2).
3. Press the memory button (1) or (2) (according to the
previous selection) for two seconds or more, and
release.
4. Push and hold the lock button on the key fob within
10 seconds.
NOTE:
Your key fobs can be unlinked from your driver’s side
memory settings by pushing the memory button (1) or
(2) for two seconds or more and releasing, and then
within 10 seconds, pushing and holding the unlock but-
ton on the key fob.
Grand Wagoneer Memor y Settings Buttons
32 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...