Loading ...
Loading ...
Loading ...
INSTALLING THE CROSSBARS
WARNING!
In a collision, loose crossbars in the vehicle could
cause injury. They could fly around in a sudden stop
and strike someone in the vehicle. Do not store the
crossbars on the cargo floor or in the passenger com-
partment. Remove the crossbars from the vehicle
when taken from their mounting. Do not store them in
the vehicle.
There are two crossbars equipped with your vehicle.
They are located in the rear cargo bin, stored in foam
blocks.
There is also a packet of fastener screws and a Torx
wrench provided in the foam blocks. You can find the
packet of fastener screws in the left foam block and the
Torx wrench in the right foam block.
There are three positions that the crossbars can be
installed in. There are also tie-down loops next to each
crossbar location on both sides of the roof.
NOTE:
The crossbars should only be used in positions 1 and
2 or positions 1 and 3. They are not designed to be
used in positions 2 and 3.
NOTE:
There are arrows on top of the crossbars that indicate
the direction that they should be installed. The arrows
should point forward toward the front of the vehicle.
Stowed Crossbars
1 — Fastener Screws
2 — Torx Wrench
Crossbar Locations
1 — Position 1
2 — Position 2
3 — Position 3
Crossbar and Tie Down Loop Locations
1 — Crossbar Installation Location
2 — Tie-Down Loop Locations
Crossbar Directional Arrow
88 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...