Loading ...
Loading ...
Loading ...
NOTE:
The wheel articulation will be represented by a yellow
color in the Wheel Articulation. If Ride Height is
adjusted, the Ride Height indicator on the screen will
switch to the appropriate height and the Wheel Articula-
tion will show the movement and change in height.
TRAIL RECORDING — IF EQUIPPED
Overview
The Trail Recording feature can be accessed from a
variety of different ways: within the Vehicle Dashboard
screen or within the Off-Road Pages. There will be
options within “Trail Recording” where you can start
recording your trail or view saved recordings where you
can see previous trails recorded.
Recording A Trail And Stop Recording
To start recording a trail, select “Start Recording”
towards the bottom of the touchscreen. Once selected,
your trail will start recording for as long as desired.
When the trail is over, press “Stop Recording”. Select
whether to save the trail in which the trail will be saved
and will appear in “Saved Recordings”. Selecting “Can-
cel” will not save the trail, and the trail will be deleted.
NOTE:
After 30 miles (48 km) a notification will appear on the
touchscreen asking if you want to keep recording.
Adding a Waypoint
On the bottom left-hand side of the touchscreen select
“Add Waypoint” from the trail recording screen. This will
allow the user to pin a location along the trail, both dur-
ing and after the recording. There are three selectable
options to mark a Waypoint: a Waypoint can be placed
whether the vehicle is in or out of motion, but can only
be edited when the vehicle is not moving. As a default,
Waypoints are named chronologically in the order in
which the Waypoints are marked or added. They can be
renamed later by pressing the edit icon located to the
right of the defaulted Waypoint name.
•
Places
•
Obstacle
•
Guidance
NOTE:
A Waypoint can be placed whether or not the vehicle is
in motion, but can only be edited when the vehicle is
not moving.
Expand/Collapse View
While in the Trail Recording screen, press the Expand
button located to the right of the Map View to enlarge
the Trail Map screen during recordings. Once in
expanded view, press the collapse icon which will
shrink the trail map during screen recordings.
Editing A Trail
After finishing recording a trail, there will be a scale to
rate the difficulty of the trail for future reference. The
scale is from 1-10 with one being the easiest and
10 being the most difficult.
NOTE:
Setting the difficulty is not required to save the trail and
can be edited afterwards.
Editing/Deleting a Waypoint
To edit a Waypoint, select the desired Waypoint on the
map. Once selected, choose the type of Waypoint. Once
selected, choose a sub-type that describes the Waypoint.
Waypoint sub-types are listed in the following table. Once
the Waypoint has been edited, press the Save button.
To delete the Waypoint, select the desired Waypoint on
the map, then press the Delete Waypoint button.
POI Obstacles Guidance
Camping Mud Bare Left
Scenic View Rock Bare Right
Staging Area Sand Dead End
Trailhead Steep Ascent Hard Left
Water Steep Descent Hard Right
Water Slow
Route Closure
Suspension Menu
1 — Wheel Articulation
2 — Current Ride Height
MULTIMEDIA 221
5
Loading ...
Loading ...
Loading ...