Loading ...
Loading ...
Loading ...
Front Comfort And Convenience
Display — If Equipped
The Front Comfort And Convenience Display is a retract-
able screen located below the main Uconnect display
that controls the front and rear climate settings just as
the Controls menu would within the Uconnect system.
Other front seat functions can also be adjusted from
this screen, such as:
•
Power Massage Seat page 41
•
Power Lumbar
page 39
•
Power Bolster page 39
NOTE:
The Front Comfort And Convenience Display can only be
used if the vehicle is in the ON/RUN position.
To stow this display and access the power outlet, USB
ports, and wireless charging pad, push the screen
open/close hard button below the display, in front of
the gear selector. Pushing the button again will lower
the screen for use.
NOTE:
When the open/close button is pushed to stow the
Front Comfort And Convenience Display screen, the
screen will turn off and save the menu it was on prior to
being stowed.
Max A/C Button
Press and release the MAX A/C button on
the touchscreen to automatically turn the air
conditioning on to the coldest temperature
setting and the highest blower speed. The
MAX A/C indicator illuminates when MAX A/C is ON.
Performing this function again will cause the MAX A/C
operation to switch into manual mode and the MAX A/C
indicator will turn off. Pressing other setting buttons will
also cause the MAX A/C to turn off.
MAX A/C sets the control for maximum cooling
performance.
NOTE:
•
The MAX A/C button is only available on the
touchscreen.
•
Pressing the MAX A/C button on the front climate
control screen will not set the rear A/C to MAX
unless the rear A/C was already active. If the rear
A/C is not active, pressing the MAX A/C button will
not turn on the rear A/C.
•
For best A/C performance, it is recommended that
the rear A/C be turned to ON or AUTO and synced to
the driver’s climate settings.
A/C Button
Press and release the A/C button on the
touchscreen, or push the toggle switch on
the faceplate down, to turn the air condition-
ing on. The A/C indicator illuminates when
A/C is on.
Recirculation Button
Press and release the Recirculation button
on the touchscreen, or push the toggle
switch on the faceplate down, to change the
system between recirculation mode and out-
side air mode. Recirculation can be used when outside
conditions such as smoke, odors, dust, or high humidity
are present. Recirculation can be used in all modes.
Recirculation may be unavailable if conditions exist that
could create fogging on the inside of the windshield.
The A/C can be deselected manually without disturbing
the mode control selection. Continuous use of Recircu-
lation mode may make the inside air stuffy and window
fogging may occur. Extended use of this mode is not
recommended.
In cold weather, use of Recirculation mode may lead to
excessive window fogging. The Recirculation feature
may be unavailable if conditions exist that could create
fogging on the inside of the windshield.
Front Comfort And Convenience Display Location
Screen Open/Close Button
GETTING TO KNOW YOUR VEHICLE 63
2
Loading ...
Loading ...
Loading ...