Loading ...
Loading ...
Loading ...
2. Locate and remove plug from the storage compart-
ment floor to expose the winch access hole.
3. Fit the jack handle extension over the drive nut. Use
the wheel lug wrench and extension to completely
lower the spare tire. Keep turning the handle coun-
terclockwise until the winch stops.
4. Slide the tire out from under the vehicle and rotate it
vertically behind the rear fascia/bumper.
5. Pull the metal retainer toward you to release it.
6. Slide the retainer up the steel extension tube and
winch cable. Rotate the retainer and push it through
the hole in the wheel.
JACKING INSTRUCTIONS
WARNING!
Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:
•
Always park on a firm, level surface as far from the
edge of the roadway as possible before raising the
vehicle.
•
Turn on the Hazard Warning Flashers.
•
Apply the parking brake firmly and set the trans-
mission in PARK.
•
Block the wheel diagonally opposite the wheel to
be raised.
•
Never start or run the engine with the vehicle on a
jack.
(Continued)
Jacking Tool Assembly
1 — Wheel Lug Wrench
2 — Jack Handle Extension
3 — Jack Handle
Winch Nut Plug
Winch Drive Nut Location
Wrench Rotation
Releasing Winch Retainer
278 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...