Loading ...
Loading ...
Loading ...
When either the (+) or the (–) switch is pushed, the
Front Comfort And Convenience Display will change to
the Seat menu. The last selected seat item of lumbar
in/out, lumbar up/down, back bolster, or thigh bolster
will be retained. Select the desired adjustment type,
and then press the (+) or (–) switch to adjust.
NOTE:
If the Front Comfort And Convenience Display is in the
stowed position, the Seat menu will display on the main
Uconnect screen.
Easy Entry/Exit Seat — If Equipped
This feature provides automatic driver seat positioning
to enhance driver mobility when entering and exiting
the vehicle.
The distance the driver seat moves depends on where
you have the driver seat positioned when you place the
vehicle’s ignition in the OFF position.
•
When you place the vehicle’s ignition in the OFF
position, the driver seat will move about 2.4 inches
(6 cm) rearward if the driver seat position is greater
than or equal to 2.7 inches (7 cm) forward of the
rear stop. The seat will return to its previously set
position when you place the vehicle’s ignition in the
ON/RUN position.
•
The Easy Entry/Easy Exit feature is disabled when
the driver seat position is less than 0.9 of an inch
(2.3 cm) forward of the rear stop. At this position,
there is no benefit to the driver by moving the seat
for Easy Exit or Easy Entry.
When enabled in Uconnect Settings, Easy Entry and
Easy Exit positions are stored in each memory setting
profile
page 31.
NOTE:
The Easy Entry/Exit feature is not enabled when the
vehicle is delivered from the factory. The Easy Entry/
Exit feature is enabled or disabled through the program-
mable features in the Uconnect system
page 182.
POWER ADJUSTMENT REAR
SEATS — IF EQUIPPED
WARNING!
•
Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death.
•
Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.
•
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your
chest. In a collision you could slide under the seat
belt, which could result in serious injury or death.
•
Do not place the seat belt webbing behind the
third row stow clip when using the seat belt to
restrain an occupant. The seat belt will not be posi-
tioned properly on the occupant and they could be
more seriously injured in an accident as a result.
CAUTION!
Do not place any article under a power seat or
impede its ability to move as it may cause damage to
the seat controls. Seat travel may become limited if
movement is stopped by an obstruction in the seat's
path.
Third Row Power Recline — If Equipped
If equipped, the power recline switch for the third row
seats is located on the trim panel next to the seat. This
switch adjusts the seatback angle forward/rearward for
occupant comfort.
The angle of the seatback can be adjusted forward or
rearward. Push and hold the forward or rearward but-
ton. The seat will move in the direction of the button
push. Release the button when the desired position is
released.
Third Row Power Recline Switch
40 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...