Loading ...
Loading ...
Loading ...
The ParkSense Active Park Assist system will turn off
automatically for any of the following conditions:
•
Parking maneuver is completed
•
Vehicle speed is greater than 28 mph (45 km/h)
when searching for a parking space during a Fully
Automated maneuver
•
Vehicle speed is greater than 18 mph (30 km/h)
when searching for a parking space during a Semi-
Automatic maneuver
•
Vehicle speed is greater than 5 mph (7 km/h) dur-
ing Semi-Automatic active steering guidance into
the parking space
•
Steering wheel is touched during Fully Automated or
Semi-Automatic active steering guidance into the
parking space
•
The gas pedal or brake pedal is pressed during Fully
Automated active steering guidance into the parking
space
•
ParkSense Front and Rear Park Assist switch is
pushed
•
Any of the doors are opened during a Fully Auto-
mated maneuver
•
The driver door is opened during a Semi-Automatic
maneuver
•
Rear liftgate is opened
•
A trailer is connected
•
Vehicle is in 4WD Low
•
Cruise Control, Adaptive Cruise Control, or Active
Driving Assist systems are engaged
•
Electronic Stability Control/Anti-Lock Braking Sys-
tem intervention
The ParkSense Active Park Assist system allows a maxi-
mum number of shifts between DRIVE and REVERSE. If
the maneuver cannot be completed within the maxi-
mum amount of shifts, the system will cancel and the
instrument cluster display will instruct the driver to com-
plete the maneuver manually.
The ParkSense Active Park Assist system will only oper-
ate and search for a parking space when the following
conditions are present:
•
Gear selector is in DRIVE
•
Ignition is in the RUN position
•
ParkSense Active Park Assist switch is activated
•
All of the doors are closed
•
Rear liftgate is closed
•
Vehicle speed is less than 15 mph (25 km/h) during
a Semi-Automatic maneuver
•
Vehicle speed is less than 25 mph (40 km/h) during
a Fully Automated maneuver
•
The outer surface and the underside of the front
and rear fascias/bumpers are clean and clear of
snow, ice, mud, dirt or other obstructions.
NOTE:
•
During a Semi-Automatic maneuver, if the vehicle is
driven above approximately 15 mph (25 km/h), the
instrument cluster display will instruct the driver to
slow down. If the vehicle is driven above approxi-
mately 18 mph (30 km/h), the system will cancel.
The driver must then reactivate the system by push-
ing the ParkSense Active Park Assist switch.
•
During a Fully Automated maneuver, if the vehicle is
driven above approximately 25 mph (40 km/h), the
instrument cluster display will instruct the driver to
slow down. If the vehicle is driven above approxi-
mately 28 mph (45 km/h), the system will cancel.
The driver must then reactivate the system by push-
ing the ParkSense Active Park Assist switch.
When pushed, the LED on the ParkSense Active Park
Assist switch will blink momentarily. If any of the previ-
ously described conditions are not present, then the
LED will turn off.
If the vehicle is in any other gear than DRIVE, and an
objected is detected in the vehicle’s path, the system
will default to Parallel Park Exit. A prompt will appear in
the Uconnect display, and the driver will need to select
“Yes” or “No” for a Parallel Park Exit maneuver. Any
other conditions will result in a default to a Parallel
Parking maneuver.
PARKSENSE AUTOMATED
PARKING — IF EQUIPPED
Parallel/Perpendicular Parking Space
Assistance Operation
When the ParkSense Active Park Assist system is
enabled, the driver must press “Park” on the Uconnect
display, and the system will begin searching for valid
parallel and perpendicular parking spaces.
NOTE:
•
The driver needs to make sure that the selected
parking space for the maneuver remains free and
clear of any obstructions (e.g. pedestrians, bicycles,
etc.).
•
The driver is responsible to ensure that the selected
parking space is suitable for the maneuver and
free/clear of anything that may be overhanging or
protruding into the parking space (e.g., ladders, tail-
gates, etc. from surrounding objects/vehicles).
146 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...