Loading ...
Loading ...
Loading ...
Rear Cross Path View
The Rear Cross Path button will give the
driver a wider angle view of the rear camera
system. The Top View will be disabled when
this is selected.
TopViewPlusFrontView
The Front View will show you what is immedi-
ately in front of the vehicle and is always
paired with the Top View of the vehicle.
Front Cross Path View
The Front Cross Path button will give the
driver a wider angle view of the front camera
system. The Top View will be disabled when
this is selected.
Back Up Camera View
The Back Up Camera button will provide a
full screen rear view with Zoom View.
NOTE:
If the Rear View Camera view was selected through the
Surround View Camera menu, exiting out of the Rear View
screen will return to the Surround View Camera menu. If
the Back Up Camera was manually activated through the
Controls menu of the Uconnect system, exiting out of the
display screen will return to the Controls menu.
Deactivation
The system can be deactivated under the following
conditions:
•
The speed of the vehicle is greater than 8 mph
(13 km/h).
•
The vehicle is shifted into PARK.
•
The vehicle is in any gear other than REVERSE and
the touchscreen X button is pressed.
•
The camera delay system is turned off manually
through Uconnect Settings
page 182.
Camera Washers
When the rear window washer is activated, the rear
Back Up and digital rearview mirror (if equipped) cam-
eras are also washed
page 62.
When the front window washer is activated, the front
cameras will also be washed
page 61.
NOTE:
•
If snow, ice, mud, or any foreign substance builds up
on the camera lenses, clean the lenses, rinse with
water, and dry with a soft cloth. Do not cover the
lenses.
•
If a malfunction with the system has occurred, see
an authorized dealer.
WARNING!
Drivers must be careful when backing up even when
using the Surround View Camera. Always check carefully
behind your vehicle, and be sure to check for pedestri-
ans, animals, other vehicles, obstructions, or blind
spots before backing up. You are responsible for the
safety of your surroundings and must continue to pay
attention while backing up. Failure to do so can result in
serious injury or death.
CAUTION!
•
To avoid vehicle damage, Surround View should only
be used as a parking aid. The Surround View camera
is unable to view every obstacle or object in your
drive path.
(Continued)
CAUTION!
•
To avoid vehicle damage, the vehicle must be
driven slowly when using Surround View to be able
to stop in time when an obstacle is seen. It is rec-
ommended that the driver look frequently over
his/her shoulder when using Surround View.
ZOOM VIEW
When the Rear View Camera image is being displayed,
and the vehicle speed is below 8 mph (13 km/h) while
in any gear selector position, Zoom View is available.
By pressing the “magnifying glass” icon in
the upper left of the display screen, the
image will zoom in to two times the standard
view.
Pressing the icon a second time will return
the view to the standard Back Up Camera
display.
When Zoom View is selected while the
vehicle is in REVERSE, then shifted to DRIVE, the cam-
era delay view will display the standard Back Up Cam-
era view. If the vehicle is then returned to REVERSE
gear from DRIVE, the Zoom View selection will automati-
cally resume.
Shifting to NEUTRAL from any gear will maintain the
selected view (Zoom or Standard) as long as the vehicle
is below 8 mph (13 km/h).
If the vehicle is in PARK, Zoom View is available until
the gear selector is placed in DRIVE or REVERSE and
speeds are at or above 8 mph (13 km/h).
STARTING AND OPERATING 165
4
Loading ...
Loading ...
Loading ...