Jeep® 2024 Wagoneer suv 2024 WAGONEER WAGONEER

User Manual - Page 41

For 2024 WAGONEER WAGONEER.

PDF File Manual, 364 pages, Download pdf file

Loading ...
Loading ...
Loading ...
CAUTION!
Do not place any article under a power seat or
impede its ability to move as it may cause damage to
the seat controls. Seat travel may become limited if
movement is stopped by an obstruction in the seat's
path.
Power Seat Bolster Adjustment
If Equipped
In Grand Wagoneer models, the front driver and pas-
senger seatback and seat cushion bolsters can be
extended outward, or retracted inward by using the (+)
and (–) adjustment switches on the door panel. The
bolsters can also be adjusted directly in the Front Com-
fort And Convenience Display or the Uconnect display.
Push the (+) switch to extend the bolsters, or push the
(–) switch to retract the bolsters.
When either the (+) or the (–) switch is pushed, the
Front Comfort And Convenience Display will change to
the Seat menu. The last selected seat item of lumbar
in/out, lumbar up/down, back bolster, or thigh bolster
will be retained. Select the desired adjustment type,
and then press the (+) or (–) switch to adjust.
NOTE:
If the Front Comfort And Convenience Display is in the
stowed position, the Seat menu will appear in the main
Uconnect display.
Cushion Extender If Equipped
In Grand Wagoneer models, the cushion can be
extended forward a couple inches (centimeters) to
increase thigh support. Push the cushion extender
switch forward or rearward to extend or retract the
cushion. Release the switch when the desired position
has been reached.
Power Lumbar If Equipped
The front driver and passenger seats may be equipped
with power lumbar adjustment.
The Wagoneer power lumbar switch is located on the
outboard side of the power seat. Push the switch for-
ward to increase the lumbar support. Push the switch
rearward to decrease the lumbar support. Pushing
upward or downward on the switch will raise and lower
the position of the support.
The Grand Wagoneer power lumbar adjustment
switches are located on the door trim. The (+) and (–)
switches can be used to adjust lumbar support in/out
and up/down. The power lumbar can also be adjusted
directly in the Front Comfort And Convenience Display
or the Uconnect display.
Seat Bolster Adjustment Switches
Wagoneer Power Lumbar Adjustment Switch
Grand Wagoneer Power Lumbar Adjustment Switches
GETTING TO KNOW YOUR VEHICLE 39
2
Loading ...
Loading ...
Loading ...