Jeep® 2024 Wagoneer suv 2024 WAGONEER WAGONEER

User Manual - Page 45

For 2024 WAGONEER WAGONEER.

PDF File Manual, 364 pages, Download pdf file

Loading ...
Loading ...
Loading ...
The level of heat selected will stay on until the
operator changes it.
For information on use with the Remote Start system,
see
page 23.
Rear Heated Seats If Equipped
The two second row outboard seats may be
equipped with heated seats. There are two
heated seat switches that allow the rear pas-
sengers to operate the seats independently.
The heated seat switches for each heater are located
on the rear of the center console.
If equipped with a Rear Comfort And Convenience Dis-
play, heated seat settings can be selected within the
display
page 67.
You can choose from HI, MED, LO, or OFF heat settings.
Indicator lights in each switch illuminate indicating the
level of heat in use.
Push the heated seat switch once to turn the HI set-
ting on.
Push the heated seat switch a second time to turn
the MED setting on.
Push the heated seat switch a third time to turn the
LO setting on.
Push the heated seat switch a fourth time to turn
the heating elements off.
The level of heat selected will stay on until the operator
changes it.
NOTE:
The engine must be running for the heated seats to
operate.
VENTILATED SEATS IF EQUIPPED
Located in the seat cushion and seatback are fans that
draw the air from the passenger compartment and
move air through fine perforations in the seat cover to
help keep the occupant cooler in higher ambient
temperatures.
Front Ventilated Seats
The ventilated seats control buttons are
located on the sides of the radio or within
the Uconnect system. The fans operate at
three speeds: HI, MED and LO.
Press the ventilated seat button once to choose HI.
Press the ventilated seat button a second time to
choose MED.
Press the ventilated seat button a third time to
choose LO.
Press the ventilated seat button a fourth time to
turn the ventilation off.
The fans can be turned on in the seatback only, seat
cushion only, or both. Press the seat image on the
touchscreen or push the seat zone button on the side
of the radio to cycle through these seat zones. An LED
will illuminate next to the selected zone(s). If equipped
with touchscreen buttons, the selected zones will be
highlighted on the seat image.
NOTE:
The engine must be running for the ventilated seats to
operate.
For information on use with the Remote Start system,
see
page 23.
Rear Ventilated Seats If Equipped
The two second row outboard seats may be
equipped with ventilated seats. The rear ven-
tilated seat control switches are located on
the rear of the center console and allow the
rear passengers to operate the seats independently.
If equipped with a Rear Comfort And Convenience Dis-
play, ventilated seat settings can be selected within the
display
page 67.
You can choose from HI, MED, LO, or OFF fan speed.
Indicator lights in each switch illuminate indicating the
level of fan speed in use.
Push the ventilated seat switch once to choose HI.
Push the ventilated seat switch a second time to
choose MED.
Push the ventilated seat switch a third time to
choose LO.
Push the ventilated seat switch a fourth time to turn
the ventilation off.
NOTE:
The engine must be running for the ventilated seats to
operate.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rear
impact. Head restraints should be adjusted so that the
top of the head restraint is located above the top of
your ear.
GETTING TO KNOW YOUR VEHICLE 43
2
Loading ...
Loading ...
Loading ...