Loading ...
Loading ...
Loading ...
ParkSense Camera Activation
If the ParkSense system detects an obstacle, a camera
image will display in the radio. The camera will continue
to display as long as the ParkSense system continues
to detect an object. This can be turned on or off in the
Uconnect system
page 182.
Front Park Assist Audible Alerts
ParkSense will turn off the Front Park Assist audible
alert (chime) after approximately three seconds when
an obstacle has been detected, and the vehicle is
stationary.
Adjustable Chime Volume Settings
Front and rear chime volume settings can be selected
from the Uconnect system
page 182.
The chime volume settings include low, medium, and
high.
ParkSense will retain its last known configuration state
through ignition cycles.
PARKSENSE WARNING DISPLAY
The ParkSense Warning screen is located within the
instrument cluster display
page 95. It provides
visual warnings to indicate the distance between the
rear fascia/bumper and/or front fascia/bumper and
the detected obstacle.
ENABLING AND DISABLING
PARKSENSE
ParkSense can be enabled and disabled
with the ParkSense switch located on the
switch panel on the forward part of the cen-
ter console, in front of the gear selector.
When the ParkSense switch is pushed to enable the
system, the instrument cluster will display the system
state.
When the ParkSense switch is pushed to disable the
system, the instrument cluster will display the
“PARKSENSE OFF” message for approximately two sec-
onds. When the gear selector is moved to REVERSE and
the system is disabled, the instrument cluster display
will display the “PARKSENSE OFF” message for as long
as the vehicle is in REVERSE.
NOTE:
When ParkSense is disabled and the gear selector is
moved to the DRIVE position, no warning message will
be displayed.
The ParkSense switch LED will be on when ParkSense
is disabled or requires service. The ParkSense switch
LED will be off when the system is enabled. If the
ParkSense switch is pushed, and the system requires
service, the ParkSense switch LED will blink momentar-
ily, and then the LED will be on.
SERVICE THE PARKSENSE PARK
ASSIST SYSTEM
During vehicle start-up, when the ParkSense System
has detected a faulted condition, the instrument cluster
will actuate a single chime, once per ignition cycle, and
it will display a pop-up. The pop-up will include up to two
faults. Possible fault messages are "Parksense Unavail-
able Wipe Rear Sensors", "Parksense Unavailable Wipe
Front Sensors", or "Parksense Unavailable Service
Required.” The pop-up message will display for five
seconds.
When the gear selector is moved to REVERSE and the
system has detected a faulted condition, the instru-
ment cluster display will display a "Parksense Unavail-
able Wipe Rear Sensors", "Parksense Unavailable Wipe
Front Sensors" or "Parksense Unavailable Service
Required" pop-up message for five seconds. After five
seconds, a vehicle graphic will be displayed with
“Unavailable” at either the front or rear sensor location
depending on where the fault is detected. The system
will continue to provide arc alerts for the side that is
functioning properly. These arc alerts will interrupt the
"Parksense Unavailable Wipe Rear Sensors",
"Parksense Unavailable Wipe Front Sensors", or
"Parksense Unavailable Service Required" messages if
an object is detected within the five second pop-up
duration. The vehicle graphic will remain displayed for
as long as the vehicle is in REVERSE.
If "Parksense Unavailable Wipe Rear Sensors" or
"Parksense Unavailable Wipe Front Sensors" appears in
the instrument cluster display make sure the outer sur-
face and the underside of the rear fascia/bumper
and/or front fascia/bumper is clean and clear of snow,
ice, mud, dirt or other obstructions and then cycle the
ignition. If the message continues to appear, see an
authorized dealer.
If the "Parksense Unavailable Service Required" mes-
sage appears in the instrument cluster display, see an
authorized dealer.
CLEANING THE PARKSENSE
SYSTEM
Clean the ParkSense sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do
not scratch or poke the sensors.
142 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...